JENCASH is cashew base resinous acid proofing cement. It is hardened by chemical reaction. It is thermosetting resinous cement. It resists acids, acidic salts, alcohols, grease, fats, mineral oils & alkalies. JENCASH will resist a temperature up to 350ºF. It is used as bonding and jointing cement for stone, tile & brick. It has very good insulation property.

Brick / tile lining based on JENCASH is recommended for severe corrosive conditions as in reaction vessels, storage tanks, neutralization pits, drains, floors and other areas.

JENCASH is used in different industries like Steel, Dyestuff, Metal Finishing, Thermal Power Plants, Fertilizers, Petrochemicals, Food processing, Beverages, Breweries, Dairies etc.

For severe corrosive conditions JENCASH is used for bedding and jointing of tile / bricks and for less severe conditions, it is used as a pointing material along with silicate cement as the bedding material.

:

:

:

:

:

PROPERTY

This is an acid resistant synthetic cement mortar based on Cashew Nutshell Liquid (C.N.S.L.) There is extra-ordinary resistance to alkalies along with good acid resistance. It has also good resistance to temperature up to 175 ºC.

The material is supplied two parts, CNSL resin Syrup and a power filler. Generally mixing at site in small usable lots in recommended. The resin is first taken in weighed quantity and the power filler is slowly mixed in it while stirring with trovel till a working consistency is obtained. This is approximately one part Liquid Solution is 2.5 to 3 parts power. Since the applicability for joints and bedding varies, the vertical joints may need more and workable mortar.

For conditions involving Oxidizing acids or glass itching acids we would be able to supply special carbon filled JENCASH.

JENCASH resists acids, acidic salts, alcohols, grease, fats, mineral oils and alkalies. It will resists a temperature up to 350ºF. It is used in acid/alkalies resisting works at fertilizer plant, Textile Mills, Oil Refineries, Chemical industries, electro-platers, Pickling plants dyestuff industries, Glass factories & Soda Plants etc.

During transport, containers must be protected from contact with other chemicals and should not be exposed directly to sunlight, solution and powder shall always be kept apart to avoid exothermic reaction between the two.

JENCASH powder and solution should be kept in a cool and dry place in tightly closed condition, away from moisture, heat and direct sunlight. For safety reasons, always ensure that JENCASH solution and powder are stored sway from each other.

Shelf life 

In case if the ambient temp. is more than 30-35 Deg. C, the shelf life of the above materials will get  reduced  accordingly.

Since the odour emanating from the solution and from prepared mortar is irritating, it is important that the workplace be provided with adequate ventilation. Contact with skin should be avoided, since it causes irritation/itching. It is recommended that barrier cream be applied before handling JENCASH mortar. In case of contact with skin it is washed with soap and plenty of water. If JENCASH solution splashes in to the eye, eye is washed with plenty of water and medical advices is sought.

Whilst JENNY CORROSION CONTROLLERS strives to ensure that any advice, information or recommendation given are appropriate and correct, it can not accept any liability directly or indirectly arising out of the use of the products, since the method and place of application of the product are beyond its control.